Water management first
Showers and tub surrounds are built around proper waterproofing, sealed transitions, and correct drain and slope planning so tile and grout are not asked to do the waterproofing job.
Bathroom remodeling in Oklahoma City
Bathroom Remodel Oklahoma City
Build a bathroom that looks right, drains right, and stays dry. We handle design help, demo, waterproofing, tile, fixtures, and clean finishing so the room works every day.
✓Design and selection help
✓Waterproofing-first installation
✓Written project scope
Built from behind the finish forward
OKC bathroom remodeling that starts with the parts you do not see
A bathroom remodel in Oklahoma City should feel simple when you live through it and solid when it is done. That comes down to the unglamorous details: substrate prep, correct slope to the drain, waterproofing continuity, and the right installation methods for the finishes you choose.
United Construction & Restoration is based in Edmond and completes bathroom remodeling OKC homeowners can rely on for daily use. Whether you are updating an aging hall bath, turning a tub into a walk-in shower, or reworking a primary bath layout, the goal is the same: a room that stays dry, cleans easily, and looks consistent from trim to tile.
If you are comparing options for the rest of the house as well, many clients start with one bathroom and then plan additional improvements with a single general contractor in Edmond.
Everyday performance
What we build into every bathroom remodel
Layout that fits real use
We help you think through clearances at the toilet, vanity, and shower door, storage needs, lighting, and where outlets and switches actually belong for daily routines.
Finishes that install clean
Tile edges, niche placement, grout line layout, trim returns, and fixture alignment are planned so the room reads straight and intentional, not patched together.
Moisture-smart ventilation
Bathrooms need reliable exhaust and a clean path for humid air. We account for fan location, duct routing realities, and how the room will actually dry out after a shower.
Jobsite control
Dust containment, floor protection, and a daily clean-up routine matter in an occupied home. We keep the work area organized so you can keep living normally.
From focused update to full rebuild
Scope options for bathroom remodeling in Oklahoma City
Bathroom remodeling in Oklahoma City can mean a focused update or a full rebuild. The right scope depends on what is failing, what you want to change, and what is behind the walls.
Common remodel scopes include:
- Tub-to-shower conversions: swapping a tub for a tiled shower or a prefabricated shower base and surround, often with new valve placement and glass.
- Shower rebuilds: correcting leaks, soft floors, or chronic grout problems by rebuilding the shower pan and wall assembly correctly.
- Vanity and tops: new vanity, stone or solid-surface top, sinks, faucet updates, mirror, and lighting changes.
- Flooring replacement: removing old flooring, addressing underlayment issues, and installing tile or other bathroom-rated flooring.
- Full bathroom remodel: layout adjustments, updated plumbing and electrical locations, new tub or shower, new toilet, vanity, lighting, ventilation, and finishes throughout.
Homes in the Oklahoma City metro range from older bathrooms with smaller footprints and layered remodel history to newer builds where the layout is fine but the finishes feel dated. Either way, we start by confirming what is structurally sound, what is moisture-damaged, and what needs to be rebuilt rather than covered up.
Plan through punch list
Our bathroom remodel process (what happens, in order)
-
Step 1 of 5
1) On-site walk-through and measurements
We look at the existing bath, take measurements, and talk through what you want to change. If there are signs of moisture damage, we flag the likely causes and the best way to correct them.
-
Step 2 of 5
2) Written scope and selections plan
You get a clear plan for what is included: demo, prep, waterproofing approach, tile scope, plumbing and electrical changes, ventilation, and finish items. If you have not chosen finishes yet, we help you sequence selections so nothing stalls mid-project.
-
Step 3 of 5
3) Demo and substrate prep
We protect adjacent areas, remove the existing materials, and inspect what is exposed. Any needed framing or subfloor corrections happen before water-resistant assemblies go in.
-
Step 4 of 5
4) Rough-ins and waterproofing
Plumbing and electrical changes are completed as required by the design, then the shower or tub surround is waterproofed using an appropriate system. This is the stage that determines long-term performance.
-
Step 5 of 5
5) Tile, fixtures, trim, and punch list
Tile and grout, vanity install, fixtures, mirror and accessories, paint and trim work are completed. We wrap with a punch list so the room is finished, detailed, and ready to use.
Bathroom budget planning
How Much Does a Bathroom Remodel Cost in Oklahoma City?
A bathroom remodel in Oklahoma City typically ranges from about $8,000 to $35,000+, depending on size and how much of the room changes. A cosmetic refresh (vanity, fixtures, lighting, paint) often lands around $8,000 to $15,000, while a full remodel with a tiled shower rebuild, flooring, and plumbing adjustments is commonly $18,000 to $35,000+.
Final price depends on demolition needs, water damage repairs, tile choices, glass, fixture tier, layout changes, and access for plumbing and ventilation. The exact cost is confirmed after an on-site measurement and a written scope.
Craftsmanship you can inspect
Bathroom remodel details that hold up
“Our old shower had started leaking and the tile always looked dirty no matter how much we scrubbed. The rebuild was done the right way and the new tile layout looks straight and intentional. The crew kept the hallway clean every day.”
“We converted a tub to a walk-in shower and updated the vanity and lighting. The schedule was clear, and when something unexpected showed up during demo, we got options and a price change in writing before work continued.”
Planning questions answered
Bathroom remodeling OKC FAQs
How long does an Oklahoma City bathroom remodel take?
Most bathroom remodels take about 2 to 6 weeks once construction starts, depending on scope and material lead times. A simple vanity and flooring update can be quicker, while a full shower rebuild with tile, glass, and plumbing changes takes longer because waterproofing, tile setting, and cure times cannot be rushed.
Can you remodel a bathroom while we live in the house?
Yes, bathroom remodeling in OKC is commonly done in occupied homes, but you need a plan for bathroom access. If it is the only full bath, we discuss sequencing to keep a toilet available as long as possible and set expectations for downtime during plumbing tie-ins, tile work, and final fixture installation.
Is a tub-to-shower conversion considered a full bathroom remodel?
A tub-to-shower conversion can be either, depending on what else changes. If the work is limited to the tub area with new valve trim and surround, it is a targeted remodel; if the project also includes flooring, vanity, lighting, and ventilation changes, it becomes closer to a full bathroom remodel Oklahoma City homeowners budget and schedule like a complete renovation.
Do you have to replace the shower pan if there is water damage or recurring grout cracks?
Often, yes, because recurring grout cracks and persistent moisture usually point to movement, an improper pan build, or waterproofing gaps. The durable fix is typically a rebuild that addresses substrate stiffness, pan slope, waterproofing continuity, and correct transitions at corners and curbs.
What choices affect the cost of OKC bathroom remodeling the most?
The biggest cost drivers are tile and labor intensity, shower complexity (niches, benches, multiple valves), plumbing relocation, glass enclosures, and any hidden repairs found during demo. Keeping the existing layout and choosing standard-size fixtures usually controls cost better than trying to force a custom layout into a tight footprint.
Can you help with design and product selections for bathroom remodeling in Oklahoma City?
Yes, we can help you narrow down finishes and make sure they fit the build plan before materials are ordered. The practical goal is to confirm dimensions, valve locations, drain placement, tile layout, and trim details early so the install stays clean and on schedule.
Ready to plan your bathroom remodel?
Tell us what you want to change and what is not working in the current bathroom. We will review the space on site, outline the right scope, and provide a written plan for your Oklahoma City bathroom remodeling project.